Design tells you how much steel and concrete a member needs. Analysis comes first: it tells you what force that member has to carry. If the analysis is wrong, the best design that follows is wrong too.
The topics follow the order of the official GATE Civil Engineering syllabus. You should be comfortable with bending moment and shear force diagrams before you start; if not, read strength of materials, topic by topic first. For the other subjects, see the GATE, ESE and SSC JE preparation guide.
What the syllabus asks
| Exam | Syllabus wording |
|---|---|
| GATE CE | Statically determinate and indeterminate structures by force and energy methods; method of superposition; analysis of trusses, arches, beams, cables and frames; displacement methods: slope deflection and moment distribution methods; influence lines; stiffness and flexibility methods of structural analysis |
| ESE Civil Paper I | Basics of strength of materials, types of stresses and strains, bending moments and shear force; analysis of determinate and indeterminate structures; trusses, beams, plane frames; rolling loads, influence lines, unit load method and other methods; free and forced vibrations; suspended cables |
| SSC JE (Theory of Structures) | Simply supported, cantilever and overhanging beams; slope and deflection of simply supported and cantilever beams; critical load for columns; chimneys, dams and retaining walls; eccentric loads |
1. Determinate and indeterminate structures
In simple words: A structure is statically determinate when the equations of equilibrium alone are enough to find every reaction and member force. If it has more supports or members than equilibrium needs, the extras are called redundants and the structure is indeterminate. You then need extra equations from the way the structure deforms.

Where you see it: A simply supported precast beam is determinate: if a support settles a little, no extra stress appears. A cast-in-place continuous beam or a building frame is indeterminate: it is stiffer and has reserve strength, but a settling support does create extra moments.
| Structure | Degree of static indeterminacy |
|---|---|
| Beam (plane, general loading) | r − 3 |
| Plane truss | m + r − 2j |
| Space truss | m + r − 3j |
| Plane rigid frame | 3m + r − 3j, minus the number of internal releases |
| Space rigid frame | 6m + r − 6j, minus the number of internal releases |
Here m is the number of members, j the number of joints and r the number of reaction components. A fixed support gives 3 reactions in a plane, a hinge gives 2 and a roller gives 1. An internal hinge in a beam or frame provides one extra equation, so it reduces the indeterminacy by one.
Kinematic indeterminacy is the number of independent joint displacements, also called degrees of freedom. A free joint of a plane frame has 3 (two translations and a rotation), and a joint of a plane truss has 2. Each support restraint removes one. If members are taken as axially rigid, each member removes one more.
Example. Find the static indeterminacy of (a) a propped cantilever, (b) a beam fixed at both ends, (c) a plane truss with 13 members, 8 joints and 3 reactions.
- (a) Reactions: 3 at the fixed end + 1 at the prop = 4. Indeterminacy = 4 − 3 = 1.
- (b) Reactions: 3 + 3 = 6. Indeterminacy = 6 − 3 = 3. With vertical loads only there is no horizontal reaction, and it reduces to 2.
- (c) m + r − 2j = 13 + 3 − 16 = 0. The truss is determinate.
2. Analysis of trusses
In simple words: A truss is a frame of straight members joined at their ends to form triangles. If loads are applied only at the joints, every member carries a straight pull or push, with no bending. That makes a truss very light for the span it covers.
Where you see it: Roof trusses of factory sheds, steel railway bridges, transmission towers and tower cranes.
- Assumptions: members are connected by frictionless pins, loads act only at joints, and the self weight of members is neglected or shared to the joints.
- Method of joints: take each joint in turn and apply ΣFx = 0 and ΣFy = 0. Start at a joint with not more than two unknown forces. Use it when all member forces are needed.
- Method of sections: cut the truss through not more than three members and apply the three equilibrium equations to one part. Use it when the force in only a few members is asked.
Zero-force members. Two rules save a lot of time: (1) if only two members that are not in a line meet at a joint with no load and no reaction, both carry zero force; (2) if three members meet at an unloaded joint and two of them are in a line, the third carries zero force.
| Quantity | Formula |
|---|---|
| Deflection of a truss joint (unit load method) | δ = Σ (P k L / A E) |
P is the force in each member due to the actual loads and k is the force in the same member due to a unit load applied at the joint, in the direction of the deflection wanted.
3. Arches and cables
In simple words: An arch carries load mainly by compression along its curve, and a cable carries load purely by tension. Both push or pull sideways on their supports. This horizontal force is what reduces the bending in an arch, and it must be resisted by the abutments.
Where you see it: Masonry arch bridges and arch dams work in compression, which suits stone and concrete. Suspension bridges and cable-stayed roofs work in tension, which suits high-strength steel wire.
| Quantity | Formula |
|---|---|
| Three-hinged arch, UDL over the whole span | H = w L² / (8 h) |
| Bending moment at any section of an arch | M = (beam moment) − H y |
| Three-hinged parabolic arch, UDL over the whole span | Bending moment is zero everywhere |
| Cable with UDL on the horizontal span | H = w L² / (8 d) |
| Maximum cable tension (at the supports) | Tmax = √[H² + (w L / 2)²] |
| Length of the cable, approximately | L + 8 d² / (3 L) |
Here h is the rise of the arch and d is the central dip of the cable. A three-hinged arch is determinate. A two-hinged arch is indeterminate to the first degree and a fixed arch to the third degree. A cable under a UDL on the horizontal span hangs in a parabola; under its own weight alone it hangs in a catenary.
Example. A three-hinged parabolic arch of 20 m span and 4 m rise carries a UDL of 30 kN/m over the whole span. Find the reactions.
- Vertical reaction at each support = w L / 2 = 30 × 20 / 2 = 300 kN.
- Horizontal thrust H = w L² / (8 h) = 30 × 20² / (8 × 4) = 375 kN.
- Because the arch is parabolic and the load is uniform, the bending moment is zero at every section. The arch is in pure compression.
4. Force and energy methods
In simple words: In the force method you remove the extra supports or members to make the structure determinate, and then find the forces that must be put back so that the structure fits together again. Energy methods find deflections from the strain energy stored in the structure.
| Tool | Formula or statement |
|---|---|
| Strain energy in bending | U = ∫ M² dx / (2 E I) |
| Strain energy in an axial member | U = P² L / (2 A E) |
| Castigliano’s second theorem | δ = ∂U / ∂P (deflection at a load, in its direction) |
| Unit load method | δ = ∫ M m dx / (E I) |
| First moment area theorem | Change of slope between two points = area of the M/EI diagram between them |
| Second moment area theorem | Deviation of one point from the tangent at another = moment of the M/EI area about the first point |
| Conjugate beam method | Shear in the conjugate beam = slope of the real beam; moment in the conjugate beam = deflection of the real beam |
| Maxwell’s reciprocal theorem | The deflection at A due to a unit load at B equals the deflection at B due to a unit load at A |
Method of superposition. If the material is linearly elastic and the deflections are small, the effect of several loads acting together is the sum of their separate effects. This lets you split a difficult loading into standard cases and add the results. It does not apply when the material yields or when deflections are large enough to change the geometry, as in a slender column.
Example. A propped cantilever of span L carries a UDL of w per metre. Find the reaction at the prop.
- Remove the prop. The free end of the cantilever deflects by w L⁴ / (8EI) downward.
- An upward force R at the free end lifts it by R L³ / (3EI).
- The prop does not move, so the two must be equal: R L³ / (3EI) = w L⁴ / (8EI), giving R = 3wL / 8.
5. Displacement methods: slope deflection and moment distribution
In simple words: Displacement methods take the rotations and movements of the joints as the unknowns. Every member end moment is written in terms of them, and the joints are then balanced. Moment distribution does the same balancing step by step with simple arithmetic, so no simultaneous equations are needed.
Where you see it: Before computers, continuous beams and building frames were analysed by moment distribution, and it is still the quickest hand check on software output. The idea behind it, that stiffer members attract more moment, is useful every day: a stiff column draws more moment from the beam than a slender one.
| Quantity | Formula |
|---|---|
| Slope deflection equation | MAB = MFAB + (2EI / L)(2θA + θB − 3Δ / L) |
| Fixed end moments, UDL w | w L² / 12 at each end |
| Fixed end moments, central point load W | W L / 8 at each end |
| Fixed end moments, point load W at a from A and b from B | W a b² / L² at A and W a² b / L² at B |
| Fixed end moments, support B sinks by Δ | 6 E I Δ / L² at each end |
| Member stiffness, far end fixed | 4 E I / L |
| Member stiffness, far end hinged | 3 E I / L |
| Distribution factor | Stiffness of the member / sum of the stiffnesses of all members at the joint |
| Carry-over factor | ½ to a fixed far end; 0 to a hinged far end |
- The distribution factors at a joint always add up to 1.
- At a fixed support the distribution factor is 0; at an end hinge or roller it is 1.
- The unbalanced moment at a joint is shared among the members in proportion to their distribution factors, with the opposite sign.
Example. At joint B, member BA is 4 m long with its far end A fixed, and member BC is 3 m long with its far end C hinged. Both have the same EI. Find the distribution factors at B.
- Stiffness of BA = 4EI / 4 = EI.
- Stiffness of BC = 3EI / 3 = EI.
- Distribution factors: BA = EI / 2EI = 0.5 and BC = 0.5. An unbalanced moment at B is shared equally.
6. Influence lines
In simple words: A bending moment diagram shows the moment at every section for a load that stays in one place. An influence line is the opposite: it shows how the value at one chosen section changes as a unit load travels across the structure.
Where you see it: Vehicles on a bridge and the trolley of a gantry crane are moving loads. The designer uses influence lines to find where the wheels must stand to produce the worst moment or shear at each section.
| Simply supported beam of span L | Influence line |
|---|---|
| Reaction at a support | A triangle: 1 at that support, 0 at the other |
| Shear at a section | Two triangles with a jump of 1 at the section |
| Bending moment at a section a from one end and b from the other | A triangle with peak ordinate a b / L at the section |
| Bending moment at mid-span | A triangle with peak ordinate L / 4 |
- Using an influence line: for a point load, multiply the load by the ordinate under it. For a UDL, multiply the load intensity by the area of the influence line under the loaded length.
- Müller-Breslau principle: the influence line for any force is the deflected shape of the structure when the restraint for that force is removed and a unit displacement is given in its place.
- Absolute maximum moment under a train of wheel loads: it occurs under one of the wheels when that wheel and the resultant of all the loads are at equal distances on either side of the centre of the span.
Example. A simply supported beam has a span of 10 m. Use the influence line to find the mid-span moment for (a) a 40 kN load at the centre and (b) a UDL of 10 kN/m over the whole span.
- The peak ordinate of the influence line at mid-span is L / 4 = 2.5 m.
- (a) M = 40 × 2.5 = 100 kN·m.
- (b) Area of the triangle = ½ × 10 × 2.5 = 12.5 m². M = 10 × 12.5 = 125 kN·m, the same as w L² / 8.
7. Stiffness and flexibility methods
In simple words: These are the same two approaches, force and displacement, written with matrices so that a computer can handle structures of any size. Flexibility is the movement caused by a unit force. Stiffness is the force needed to cause a unit movement. One is the inverse of the other.
| Flexibility (force) method | Stiffness (displacement) method | |
|---|---|---|
| Unknowns | Redundant forces | Joint displacements |
| Number of unknowns | Degree of static indeterminacy | Degree of kinematic indeterminacy |
| Equations used | Compatibility of displacements | Equilibrium of joints |
| Related hand methods | Consistent deformation, three moment equation, Castigliano | Slope deflection, moment distribution |
| Best suited to | Structures with few redundants | Structures with few joint displacements; all computer programs |
For a single axial member the flexibility is L / AE and the stiffness is AE / L. Both matrices are square and symmetric, and [k] = [f]−1. Structural analysis software uses the stiffness method. You can check simple beams quickly with the beam analysis calculator, and the effect of end fixity is compared in fixed beams vs simply supported beams.
Common mistakes
- Counting reactions wrongly: a fixed support has 3 in a plane frame, a hinge 2 and a roller 1.
- Forgetting to subtract internal hinges when finding the indeterminacy of a frame.
- Using 4EI/L for a member whose far end is hinged. It is 3EI/L, and nothing is carried over to that end.
- Giving both fixed end moments the same sign. One is clockwise and the other anticlockwise.
- Confusing an influence line with a bending moment diagram. The load position is fixed in one and moving in the other.
- Applying superposition to a problem where the material has yielded or the deflections are large.
Frequently asked questions
Which topics of structural analysis are most important for GATE?
Static and kinematic indeterminacy, truss member forces, moment distribution and slope deflection, influence lines and deflection by the unit load method appear almost every year. Arches, cables and the matrix methods usually give one question between them.
Force method or displacement method: which should I use?
Use the one with fewer unknowns. If the static indeterminacy is smaller than the kinematic indeterminacy, use a force method; otherwise use a displacement method. For continuous beams and frames with few joints, moment distribution is usually the quickest.
Is structural analysis part of SSC JE?
SSC JE covers it under theory of structures, at a simpler level: types of beams, shear force and bending moment diagrams, slope and deflection of simple beams and columns. Indeterminate analysis is rarely asked.
Do I need to learn the matrix methods in full?
For GATE, know the idea, the size of each matrix, the relation between stiffness and flexibility, and how to write the stiffness matrix for a simple beam or spring system. ESE Mains can ask a complete small problem.
Unlock an ad-free experience plus a growing library of ready-to-use civil-engineering calculators, IS-code cheat-sheets and formula PDFs. From just ₹99.




